Wire weave pendant. Wire Wrap tutorial.

Pendant made of copper wire and agate. Wire Wrap tutorial.

Wire weave pendant. Wire wrapped jewelry. Jewelry making basics. How to Make Wire Wrapped Pendant. Step by step wire wrap tutorial.

Materials needed in DIY the easy wire wrapped pendant:

To make the pendant, we need a flat bead with a hole in agate and a copper wire 1 mm and 0.4 mm thick. You can replace the copper wire with another wire. Usually I use long pieces of wire. You can always cut off excess wire at the end of the job.

I work with natural stones and natural metals (copper, nickel silver, brass, bronze, test silver 925).
Use appropriate wire thickness. I make jewelry of wire 1 mm (18 ga) and 0.4 mm (26 ga) thick. You can use wire with a thickness of 0.8 mm (20 ga) and 0.3 mm (28 ga).

A set of hand tools. In my videos you often see a hand tool as in the photo below. I recommend you use such a tool.

Wire wrapped jewelry. Jewelry making basics. How to Make Wire Wrapped Pendant. Step by step wire wrap tutorial.

I don’t speak much, I don’t like writing, I translate poorly into English. Sorry…

But, I take many detailed photos for you!

All jewelry I make made from natural stones with my own hands for you with love.

Wire weave pendant. For the pendant you need to make an additional element of copper wire.

Wire weave pendant. Pendant made of copper wire and agate. Wire Wrap tutorial.

We make a ball at the end of the copper wire. We need a gas burner.

For my jewelry I use only natural wire (copper, nickel silver, bronze, brass, silver). I patinate jewelry with wire with special solutions and polish with felt circles using polishing pastes. Sometimes, so that the wire does not darken over time, I coat the metal with a special varnish.