Wire necklace. Wire wrap tutorial. How to make wire necklace step by step. Today’s Wire necklace is a great project for anyone just getting started in wire wrapping. Handmade wire jewelry. How to wire wrap stones.
I don’t speak much, I don’t like writing, I translate poorly into English. Sorry…
But, I take many detailed photos for you!
Do you love making wire jewelry as much as I do? I’ve been making jewelry from wire for nearly 15 years, and I didn’t want to keep this knowledge to myself, so I write wire jewelry tutorials sharing what I’ve learned.
To make a necklace of wire with our own hands, we need beads of different sizes. In my case, these are beads made of natural stone 7; 8 and 12 mm. Any soft wire 1 mm thick; 0.8 mm and 0.4 mm. I used silver-colored Chinese wire. Accessories for the design of the necklace: chain, lock, metal beads, connecting rings.
You’ll Need Jewelry Making Pliers.
1) Flat Nose Pliers
2) Wire Cutters
3) Optional Round Nose Pliers
A special tool can be used to twist wire spirals. Such a tool is mainly used for the manufacture of rings.
We will use more affordable means. I will show you three options for making spirals.
Wire necklace. Wire wrap tutorials.
At the bottom of the article, watch the video.
You can take a hand drill and attach it to the board. Then fix the board with clamps on the edge of the table. Insert a 1-2 mm thick needle into the cartridge (knitting needles can be used). We wind the wire with a thickness of 0.4 mm.
Pull the finished spiral from the knitting needle.
Next – inside the finished spiral we insert a wire 1 mm thick and again wind it onto a knitting needle.
It should turn out as in the photo below. Determine the desired length of the spiral experimentally. I have finished spirals 4-5 cm long.
We insert a 1 mm thick wire into the finished spiral and make loops for fastening on both sides.
We use an electric drill.
If you don’t have anything, make a small home-made machine out of metal corners.
Make some spirals for the necklace. Next we will make large beads for the necklace.
We need a 0.8 mm thick wire and a spoke. Beads of 7 and 8 mm. We wind the spiral as in the photo about 4 cm. Next – see photos.
Just like in a spiral, we insert a wire 1 mm thick. On both sides we make loops for fastening the connecting rings.
Collect the necklace. We use accessories for jewelry of the corresponding color.
Make a pendant from a spiral and beads 12 mm. Intermediate beads with flat metal beads are also 12 mm. Attach the chain with the lock.
Wire necklace. Wire wrap tutorials. Video.
Also, check out Wire wrapping pendant tutorials:
Wire wrapped tutorials PDF Valeriy Vorobev
Pin up on Pinterest